Netduino home hardware projects downloads community
 
 
tech specs         buy now
technical specifications
product size
in the bag
  ● netduino plus
  ● four sticky feet
  ● 3 ft micro usb cable
(limited time)
system requirements
Windows
  ● Windows XP, Vista, 7 or 8 (32 or 64 bit)
  ● 1.6 GHz or faster processor
  ● 1 GB RAM
  ● Up to 3 GB of available hard drive space for Visual Studio Express 2010
Mac OS and Linux
  ● Parallels
Serial deployment and partial USB support
Requires copy of Windows in virtual machine
  ● VMWare Fusion or Oracle VirtualBox
Serial deployment and partial USB support
Requires copy of Windows in virtual machine
  ● Experimental Mono (native) support
Future native Mac OS and Linux support provided by an experimental open source project
environmental
  ● operating temperature:
0 - 70 °C (32 - 158 °F)
  ● RoHS compliant
  ● Pb-free (lead-free)
processor and memory
  ● Atmel 32-bit microcontroller
  ● Speed: 48MHz, ARM7
  ● Code Storage: 64 KB
without networking: 128 KB
  ● RAM: 42 KB
without networking: 60 KB
microcontroller documentation

AT91SAM7X512 (summary)
AT91SAM7X512 (datasheet)
buttons and leds
led colors
  ● power led: white
  ● user led: blue
  ● ethernet leds: 2 green, 1 amber
button features
  ● functions as a reset button (default)
  ● can be used as GPIO input
design files and source code
design files (open source)
  ● netduino plus schematics
  ● netduino plus board layout
source code (open source)
  ● .NET Micro Framework v4.1 source
  ● netduino firmware v4.1.0 source
  ● netduino sdk v4.1.0 source
input and output
digital i/o features
  ● all 20 digital and analog pins: GPIO
  ● digital pins 0-1: UART 1 RX, TX
  ● digital pins 2-3: UART 2 RX, TX
  ● digital pins 5-6: PWM, PWM
  ● digital pins 7-8: UART 2 RTS, CTS
  ● digital pins 9-10: PWM, PWM
  ● digital pins 11-13: SPI MOSI, MISO, SPCK
  ● analog pins 4-5: I2C SDA, SCL
networking
  ● ethernet: 10/100 mbps
  ● network stack: lwIP
storage
  ● micro sd (up to 2 GB)
  ● auto card detect
power
  ● input: 7.5 - 12.0 VDC or USB powered
  ● output: 5 VDC and 3.3 VDC regulated
  ● analog reference: 2.6 - 3.3 VDC
only required when using ADC features
  ● max current: 8 mA per pin
digital pins 2, 3, 7: 16 mA per pin
analog pins 0-3: 2 mA per pin
microcontroller max current: 200 mA total
  ● digital i/o are 3.3 V--but 5 V tolerant
internal pull-ups are 3.3 V tolerant
 
home    hardware    projects    downloads    community    where to buy    contact Copyright © 2010-2014 Secret Labs LLC  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.